|
|
1000 Gallon Truck Mount Unit
This type of equipment is used on larger commercial seal
coating jobs. Using a spray bar, you can single seal coat 60,000 to 112,000 square feet per hour. This large unit can be used as an applicator unit, a bulk sealer transporting truck, or a pre-mix nurse tanker to fill smaller seal- coating units at the job site. A 1000 gallon unit requires at least a 24,000 lb. GVW truck with a minimum cab to rear axle measurement of 112 inches.
1000 Gallon Truck Mount Unit
$20,999 (#1000DELBU)
Standard Features
- 1000 GALLON CAPACITY FULL SWEEP
HYDRAULIC DRIVEN- THREE BLADE AGITATOR
(Forward and Reverse)
- PV4 WILDEN DOUBLE-DIAPHRAM MATERIAL PUMP
(Pumps Sand With NO PROBLEMS)
- Rol-Air AIR COMPRESSOR POWERED BY A HONDA ELECTRIC START GAS ENGINE
- SPECIAL PATENTED LID (Prevents Spillage)
- LIGHT WEIGHT ALUMINUM SPRAY WAND
- MANUAL REWIND MATERIAL HOSE REEL
- 100 FOOT OF MATERIAL HOSE (Larger Working Radius)
- POLY-PLASTIC WATER TANK (No Rusty Water)
- STANDARD STEEL TRUCK BED - approximately 14' x 7 1/2'
Optional Equipment
- SIX (6) TIPPED SPRAY BAR WITH IN-CAB CONTROLS (# ABSB6)
(One Man Spraying Operation) - ELECTRIC POWERED REWIND HOSE REEL (# E1820)
|
