Product
Click to view photo | Product # | Description | Price | Purchase |
Automatic Air Actuated Water Drain | #WV-1 | The pressure actuated tank drain valve will eject tank condensation from the receiver each time air pressure is applied or removed. This typically occurs when the compressor loads and unloads or starts and stops. The amount of liquid expelled from the tank depends greatly on cycle time, humidity, and operating pressure. | 46.95 | |
Filter and Housing for Emglo Compressor | #610-1226 | Includes Filter and Housing | 25.95 | |
Filter for Emglo Compressor | #610-1225 | . | 11.95 | |
Brass Intake Tube | #610-1156 | From Compressor to Tank | 36.95 | |
Brass After Cooling Tubing | #J59 | From Compressor | 39.95 | |
Unloader | #RCB-M-HU | For Emglo | 54.75 | |
Regulator & Air Lubricator Kit | RL74C | Gauge, Bracket, Regulator & Air Lubricator (Includes Assembly) | 149.99 | |
Regulator Only | R74G4 | 250 PSI maximum input; 2 to 125 PSI adjustable output. Balanced poppet and efficient aspirator provide quick response and accurate pressure regulation. Piston design gives long service life. Includes two (2) 1/4” gauge ports and two (2) 1/2” line ports. | 64.95 | |
Lubricator Only | #L74C | Venture bypass for wide operating range with very low pressure drop. Precision needle valve feed adjustment. | 74.95 | |
Air Gauge | 5WH40 | 200 lb. Air Gauge Male 1/4” pipe thread. | 14.95 | |
Air Quick Disconnect - Female | #4X795 | Industrial interchange sleeve-type couplers and plugs have zinc plated steel bodies. 3/8” male pipe thread. | 9.49 | |
Air Quick Disconnect - Male | #4X792 | Industrial interchange sleeve-type couplers and plugs have zinc plated steel bodies. 3/8” male pipe thread. | 3.99 | |
Self-Contained Continuous Run Unloader | #125-175 | Can be applied to any gas engine driven compressor. Preset to cut in at 95 PSI and out at 115 PSI. Range and differential can be adjusted to fit needs. 50 to 135 PSI working range. Additional spring provided to accommodate 110 to 250 PSI range. Stainless steel springs and Teflon seats. 1/8” tap for engine throttle control. | 84.95 | |
Ingersoll-Rand Replacement Unloader Valve | #322-50342 | | 149.95 | Please Call for optimal shipping price |
12 Volt Starter Solenoid | #24022 | •Single Pole Terminal •Universal Applications •Flat Mounting Bracket | $15.99 | |
Solenoid By-Pass | #9183 | Eliminates standard solenoids and gives a positive start every time. Instructions included. | $13.99 | |
Magneto Ignition Switch | #95520-B | Heavy Duty | 28.95 | |
Honda Ignition Switch | #35100-ZE2-023 | | $79.99 | |
